0.3mm لفة ورقة PP اللمعان اللامع
Pulixin is an excellent and leading plastic sheet Manufacturer & factory in China. We have advanced technology and equipment, mature foreign trade and export experience, and have established good cooperative relations with customers in more than 60 countries. Free samples supply, OEM & ODM accepted
- ماركة: بوليكسين
- أصل: شنغهاي ، الصين
- موك: 5 طن
- سماكة: 0.3 ~ 2mm
- عرض: 300 ~ 850mm
- طلب: تشكيل حراري
- أرسل الاستفسار
-
- بريد إلكتروني: [email protected]
- هاتف: +8615221762039
- whatapp
- WeChat
وصف
Features Of 0.3mm Glossy Antistatic Dissipate PP Sheet Roll
The melting point can be as high as 167℃ because of PP sheet roll the structure and high crystallization. PP sheet roll has heat and corrosion resistance, products can be steam disinfection is its outstanding advantage.Low density, is the lightest universal plastic.The disadvantage of PP sheet roll is that low temperature impact resistance is poor, more easy to aging, but can be overcome by modification.
The melting point can be as high as 167℃ because of PP sheet roll the structure and high crystallization. PP sheet roll has heat and corrosion resistance, products can be steam disinfection is its outstanding advantage.Low density, is the lightest universal plastic.The disadvantage of PP sheet roll is that low temperature impact resistance is poor, more easy to aging, but can be overcome by modification.
Specification Of 0.3mm Glossy Antistatic Dissipate PP Sheet Roll
Copolymer ص material has lower thermal deformation temperature (100℃), low transparency, low gloss and low rigidity, but PP sheet roll has stronger impact strength. The impact strength of PP sheet roll increases with the increase of ethylene content.The vica softening temperature of PP sheet is 150℃. Due to the high crystallinity, the surface stiffness and scratch resistance of this material are very good.The melt mass flow rate (MFR) of PP is usually 1~100.PP materials with low MFR have better impact resistance but lower tensile strength.For the same MFR material, the impact strength of the copolymer is higher than that of the homopolymer.Due to crystallization, the shrinkage rate of PP is quite high, generally 1.6~2.0%.
معلمات المنتج
Parameters of 0.3mm لفة ورقة PP اللمعان اللامع
PP sheet is also a kind of ص material, in the current life has a wide range of applications, but the general PP sheet because of the influence of temperature often do not have good wear resistance, and antistatic effect is not ideal, it is easy to get dust, not easy to clean.
PP sheet is also a kind of ص material, in the current life has a wide range of applications, but the general PP sheet because of the influence of temperature often do not have good wear resistance, and antistatic effect is not ideal, it is easy to get dust, not easy to clean.
- Density: 0.92~0.95 g/cm3
- Width: 300~900mm
- Thickness: 0.3~2.0mm
- Antistatic resistance value: 10^9~10^11Ω
- Color: Any Color
- Surface: Smooth,Glossy, No dust
- Processing Type: Multiple extrusion
- Certificates: SGS, ISO9001,ISO14001
- Temperature: -30℃-120℃
لماذا تختار بوليكسين
Pulixin هي شركة تصنيع لفة بلاستيكية PP رائدة في الصين. يغطي مصنعنا مساحة تزيد عن 10000 متر مربع ولديها 4 خطوط إنتاج صلبة من البولي بروبيلين مع معدات دولية متقدمة. يمكن أن ينتج 3000-5000 طن من صفائح PP البلاستيكية شهريًا ، ويتجاوز الحد الأقصى لسعة التخزين 10000 طن.- مصنع عالية المستوى
- 1 ، 6000㎡ المنطقة
2 ، 10 خطوط التحميل المشترك
3 ، 15 سنة خبرة
4 ، 2300+ عملاء عاديين
- مراعاة الخدمة
- 1 ، الرد السريع على الاستفسارات
2 ، عينة مجانية على دفع البريد
3 ، سعة قوية ، إنتاج قصير وتسليم سريع
4 ، فحص المصنع مقبول
5 ، دعم OEM
- مراقبة جودة صارمة
- 1 ، خطأ في السماكة:+-0.1mm
2 ، الوزن erroe:+-1 كجم
3 ، المعاوقة المضادة للاتحاد: +-0.1Ω
- في الوقت المحدد
- 1 ، الإنتاج: 1 أيام بعد الدفع المسبق
2 ، التسليم: 5 أيام بعد الدفع النهائي
