ESD PP 10^10 Plastic Roll In Virgin Raw Materials
Pulixin is an excellent and leading plastic sheet Manufacturer & factory in China. We have advanced technology and equipment, mature foreign trade and export experience, and have established good cooperative relations with customers in more than 60 countries. Free samples supply, OEM & ODM accepted
- ماركة: بوليكسين
- أصل: شنغهاي ، الصين
- موك: 5 طن
- سماكة: 0.3 ~ 2mm
- عرض: 300 ~ 850mm
- طلب: تشكيل حراري
- أرسل الاستفسار
-
- بريد إلكتروني: [email protected]
- هاتف: +8615221762039
- whatapp
- WeChat
وصف
Features Of ESD PP Plastic Roll
PP extruded sheet roll is a popular thermoforming materials for food packaings, electronic packagings, cosmetics packagings medical packagings and hardware packaings.,etc. The width of PP Plastic sheet roll is 300~900mm. The thickness of PP Plastic sheet roll range from 0.3~2.0mm. Colorful PP sheets could be produced according to Pantone. card. When PP sheet roll used in food industry, the temperature could reach -40℃ to 120℃. For examples, Sushi tray, bento box, cup, cup lids and so on. ESD PP sheet roll widely used in electronic inductries for antistatic/conductive performance.
PP extruded sheet roll is a popular thermoforming materials for food packaings, electronic packagings, cosmetics packagings medical packagings and hardware packaings.,etc. The width of PP Plastic sheet roll is 300~900mm. The thickness of PP Plastic sheet roll range from 0.3~2.0mm. Colorful PP sheets could be produced according to Pantone. card. When PP sheet roll used in food industry, the temperature could reach -40℃ to 120℃. For examples, Sushi tray, bento box, cup, cup lids and so on. ESD PP sheet roll widely used in electronic inductries for antistatic/conductive performance.
Specification of ESD PP Plastic Roll
PP Sheet Blister Problem Treatment Sheet Forming
1. heating too fast.
The following methods can be taken to exclude: appropriately reduce the heater temperature.Slow down the heating speed appropriately.Properly increase the distance between the sheet and the heater, so that the heater from the sheet some further.
2. uneven heating.The following methods can be adopted to exclude:
(1) with baffle plate, air distribution hood or screen screen to adjust the distribution of hot air, so that the sheet parts evenly heated.
(2) check whether the heater and shelter net is damaged, and repair the damaged parts.
3. wet sheet.The following methods can be adopted to exclude:
(1) pre-drying treatment.For example, the thickness of 0.5 mm polycarbonate sheet should be dried for 1-2h at the temperature of 125-130 ~C, and the thickness of 3mm PP sheet should be dried for 6-7h.The thickness of 3mm * wood should be dried at 80-90 ‘E temperature for 1 — 2 hours, and should be immediately after drying hot forming.
(2) preheating treatment.Change the heating method to heating both sides.Especially when the thickness of the sheet is above 2nan, the two sides must be taken and heated.Do not open the PP sheet of moisture-proof packaging too early.PP sheet should be unsealed before hot forming and formed immediately.
PP Sheet Blister Problem Treatment Sheet Forming
1. heating too fast.
The following methods can be taken to exclude: appropriately reduce the heater temperature.Slow down the heating speed appropriately.Properly increase the distance between the sheet and the heater, so that the heater from the sheet some further.
2. uneven heating.The following methods can be adopted to exclude:
(1) with baffle plate, air distribution hood or screen screen to adjust the distribution of hot air, so that the sheet parts evenly heated.
(2) check whether the heater and shelter net is damaged, and repair the damaged parts.
3. wet sheet.The following methods can be adopted to exclude:
(1) pre-drying treatment.For example, the thickness of 0.5 mm polycarbonate sheet should be dried for 1-2h at the temperature of 125-130 ~C, and the thickness of 3mm PP sheet should be dried for 6-7h.The thickness of 3mm * wood should be dried at 80-90 ‘E temperature for 1 — 2 hours, and should be immediately after drying hot forming.
(2) preheating treatment.Change the heating method to heating both sides.Especially when the thickness of the sheet is above 2nan, the two sides must be taken and heated.Do not open the PP sheet of moisture-proof packaging too early.PP sheet should be unsealed before hot forming and formed immediately.
معلمات المنتج
Parameters of ESD PP Plastic Roll
| مواصفة | PP Plastic Sheet roll | ||
| لون | أي لون | طلب | التغليف الكهربائي عبوات الغذاء التجميلية&الهدايا. |
| عرض | 300 ~ 900mm | شهادة | SGS ، Rohs |
| سماكة | 0.3 ~ 1.5mm | ضمان | سنتان |
| فئة | الطباعة مُجَمَّع Food grade نظافة عالية موصلة بوليمر مكافحة أنيستاتيكي دائم شائع مضاد للحيوان. ، إلخ. |
لون البضائع النهائية | غير لامع/لامع شفاف الألوان المشتركة. |
| مقاومة | 10^3 ~ 10^11o | مو | 3 طن |
| التصفيح | PP ، PS ، PET ، إلخ. | Price | Based on detailed specification |
| التغليف | تصدير البليت البلاستيكي | ميناء | نينغو/شنغهاي |
لماذا تختار بوليكسين
Pulixin هي شركة تصنيع لفة بلاستيكية PP رائدة في الصين. يغطي مصنعنا مساحة تزيد عن 10000 متر مربع ولديها 4 خطوط إنتاج صلبة من البولي بروبيلين مع معدات دولية متقدمة. يمكن أن ينتج 3000-5000 طن من صفائح PP البلاستيكية شهريًا ، ويتجاوز الحد الأقصى لسعة التخزين 10000 طن.- مصنع عالية المستوى
- 1 ، 6000㎡ المنطقة
2 ، 10 خطوط التحميل المشترك
3 ، 15 سنة خبرة
4 ، 2300+ عملاء عاديين
- مراعاة الخدمة
- 1 ، الرد السريع على الاستفسارات
2 ، عينة مجانية على دفع البريد
3 ، سعة قوية ، إنتاج قصير وتسليم سريع
4 ، فحص المصنع مقبول
5 ، دعم OEM
- مراقبة جودة صارمة
- 1 ، خطأ في السماكة:+-0.1mm
2 ، الوزن erroe:+-1 كجم
3 ، المعاوقة المضادة للاتحاد: +-0.1Ω
- في الوقت المحدد
- 1 ، الإنتاج: 1 أيام بعد الدفع المسبق
2 ، التسليم: 5 أيام بعد الدفع النهائي
