لفة ورقة البلاستيك الوركين

Description of HIPS plastic sheet roll

HIPS plastic sheet roll is easy to thermoform. The thermoforming temperature should be 130 to 150 degrees Celsius.
The draw ratio is 5: 1, which is higher for deep thermoformed products.

Because of its susceptibility to moisture, hips plastic sheet roll is recommended to be stored neatly at room temperature in a dry and
well-ventilated warehouse to prevent moisture.

Usage period: The storage period is 9 months. In order to achieve the best results, it is recommended to use within 4 months.

At present, hips plastic sheet roll has partially replaced the expensive ABS material. Wide operating temperature range (about -20 ° C to 100 ° C),
light specific gravity (1.03Kg / l, the same specifications, the same weight of HIPS sheet is 34% longer than PVC), good plastic processing performance, can adapt to large stretch Complex blister.
Can be widely used in: light boxes, advertising, plastic, silk screen, model materials, insulation materials, etc.

لفة ورقة البلاستيك الوركين has low density (light weight), environmental protection and non-toxic, very good plasticity, poor toughness and brittleness,
can not be made into a transparent material, so it can only be made into a base type blister.