Pulixin es un excelente y principal fabricante y fábrica de láminas de plástico en China. Contamos con tecnología y equipos avanzados, experiencia madura en comercio exterior y exportación, y hemos establecido buenas relaciones de cooperación con clientes de más de 60 países. Suministro de muestras gratuitas, aceptamos OEM y ODM.
HIPS Blister Sheet Roll es high impact strength and toughness, can be arbitrarily colored, molding, chemical corrosion resistance, electrical properties are good, rubber modified polystyrene, impact strength and toughness has been greatly improved.
At present, it has partially replaced the expensive ABS material. Wide temperature range (about -20 degrees ~ 100 degrees), light specific gravity (1.03Kg/l, Hoja HIPS with the same specification and the same weight is 34% longer than PVC), good blister processing performance, can be used to stretch large and complex blister.
HIPS Blister Sheet Roll can be widely used in: light box, advertising, blister, screen printing, model materials, insulation materials.
HIPS Blister Sheet Roll material: small density (light weight), environmentally friendly non-toxic, plasticity is very good, the toughness difference is easy to brittle, can not be made into transparent material, so it can only be made into the substrate class blister.
HIPS Blister Sheet Roll is a translucent material, is not mixed with any materials, sheet surface smooth, no miscellaneous, often used in the food packaging industry.
HIPS Blister Sheet Roll produced by conventional HIPS sheet manufacturers is glossy on the front and matte on the back, but once it is heated and blister, the positive gloss will disappear.Our company adopts special formula and advanced technical equipment, which can make Hoja HIPS rollo después del moldeo de la ampolla, la superficie todavía tiene una sensación brillante, al igual que la hoja de PVC.Y el HIPS Blister Sheet Roll producido por este proceso es de alta protección medioambiental, muy adecuado para bandejas de alimentos y bandeja interior.
Elemento de prueba | Método de ensayo | Unidad | Propiedades |
Peso específico | ASTM D792 | g/cm3 | 1.05 |
Resistencia al impacto | ASTM D256 | mpa | 35 |
Resistencia a la tracción | ASTM D638 | mpa | 29 |
Temperatura de deflexión térmica | ASTM D648 | ℃ | 85 |
Resistencia a la flexión | ASTM D790 | mpa | 36 |
COLOR | Inspección visual | / | Cualquier color (Coloreable) |
RESISTENCIA SUPERFICIAL | ASTM D257 | Ω | / |