Pulixin es un excelente y principal fabricante y fábrica de láminas de plástico en China. Contamos con tecnología y equipos avanzados, experiencia madura en comercio exterior y exportación, y hemos establecido buenas relaciones de cooperación con clientes de más de 60 países. Suministro de muestras gratuitas, aceptamos OEM y ODM.
Black Volume Conductive HIPS Plastic Sheet Roll Se utiliza principalmente en el campo del envasado electrónico y alimentario. Black Volume Conductive HIPS Plastic Sheet Roll could be produced any color as per clients requirements. Mostly black color for conductive HIPS sheets. We have professional engineer team for blister. Any requirements could be customized. All materials are 100% virgin. The thickness is from 0.3~2.0mm.All Rollos de PP/PS/PET producido en un entorno sin polvo.
PS roll has small density (light weight), environmental protection, non-toxic, very good plasticity, poor toughness, easy to be brittle, can not be made into transparent materials, so it can only be made into a substrate type of blister, because it is easy to crack, this kind of blister is not suitable for recovery;
Black Volume Conductive HIPS Plastic Sheet Roll Can be widely used in thermoforming electronic packagings.
A, ordinary thin blister thickness of 0.14 ~ 5.0 mm – mainly use PVC, PP, PS (HIPS), PET (including APET, PETG), PE, BOPS, and recycled paper such as the effect of various materials and folding, folded in half, thirty percent, cylinder, folding box, box, high frequency and other non thermal forming blister products, Rollo de hoja de PP/PS/PET widely used in food, medicine, electronics, toys, computers, daily necessities, cosmetics and mechanical hardware industry, etc.
B, special thick blister thickness of 0.14 ~ 8.0 mm – mainly use PVC, PP, PS (HIPS), PET (including APET, PETG), PE, ABS, PC and PMMA, etc all kinds of material and the effect of injection molding type blister products, the main products are refrigerator inner, advertising light boxes, product display, PET cage, chassis, after the rear projection TV shell, and a variety of mechanical panels, etc., can replace plastic injection products, low mould cost (only 1/20 of the injection mold), short production cycle, mould development time is short, generally only 3 ~ 5 days), etc
The reason for not on the kind of materials to classify, mainly is to consider that ordinary thin plastic and special thick plastic materials used by the material has some differences, but PVC roll, PP roll, PS roll y Rollo PET in the two kinds of plastic products are a place in the blister products, PVC roll, PP roll, PS roll y Rollo PET can be called blister products of the material family of the “four heavenly Kings”!
Elemento de prueba | Método de ensayo | Unidad | Propiedades |
Peso específico | ASTM D792 | g/cm3 | 1.05 |
Resistencia al impacto | ASTM D256 | mpa | 35 |
Resistencia a la tracción | ASTM D638 | mpa | 29 |
Temperatura de deflexión térmica | ASTM D648 | ℃ | 85 |
Resistencia a la flexión | ASTM D790 | mpa | 36 |
COLOR | Inspección visual | / | Cualquier color (Coloreable) |
RESISTENCIA SUPERFICIAL | ASTM D257 | Ω | 10^9 |