Embedded Volume Conductive HIPS Plastic Sheet Roll For Thermoforming Electronic Tray

 Specification Of Black Volume Conductive HIPS Plastic Sheet Roll:
Black Volume Conductive HIPS Plastic Sheet Roll Can be widely used in thermoforming electronic packagings.
A, ordinary thin blister thickness of 0.14 ~ 5.0 mm – mainly use PVC, PP, PS (HIPS), PET (including APET, PETG), PE, BOPS, and recycled paper such as the effect of various materials and folding, folded in half, thirty percent, cylinder, folding box, box, high frequency and other non thermal forming blister products, Rollo de hoja de PP/PS/PET widely used in food, medicine, electronics, toys, computers, daily necessities, cosmetics and mechanical hardware industry, etc.
B, special thick blister thickness of 0.14 ~ 8.0 mm – mainly use PVC, PP, PS (HIPS), PET (including APET, PETG), PE, ABS, PC and PMMA, etc all kinds of material and the effect of injection molding type blister products, the main products are refrigerator inner, advertising light boxes, product display, PET cage, chassis, after the rear projection TV shell, and a variety of mechanical panels, etc., can replace plastic injection products, low mould cost (only 1/20 of the injection mold), short production cycle, mould development time is short, generally only 3 ~ 5 days), etc
 
The reason for not on the kind of materials to classify, mainly is to consider that ordinary thin plastic and special thick plastic materials used by the material has some differences, but PVC roll, PP roll, PS roll y Rollo PET in the two kinds of plastic products are a place in the blister products, PVC roll, PP roll, PS roll y Rollo PET can be called blister products of the material family of the “four heavenly Kings”!
 

1. Densidad: 1,05 g/cm3
2. Anchura: 300~900mm
3. Espesor: 0,3~2,0 mm
4. Resistance Value: 10^4~10^6Ω
5. Color: Cualquier color
6. Surface: Smoothly, Glossy
7. Temperatura: -15℃-85℃
8. Aplicaciones: Termoformado de envases de alimentos, envases electrónicos, envases cosméticos, envases médicos y envases de hardware, etc.

Parámetros de Black Volume Conductive HIPS Plastic Sheet Roll:

Elemento de prueba	Método de ensayo	Unidad	Propiedades
Peso específico	ASTM D792	g/cm3	1.04
Resistencia al impacto	ASTM D256	mpa	35
Resistencia a la tracción	ASTM D638	mpa	29
Temperatura de deflexión térmica	ASTM D648	℃	85
Resistencia a la flexión	ASTM D790	mpa	36
COLOR	Vispección visual	/	Personalizado
RESISTENCIA SUPERFICIAL	ASTM D257	Ω	1011