ESD PP 10^10 Rollo de plástico en materias primas virgen

ESD PP 10^10 Plastic Roll In Virgin Raw Materials-0

ESD PP 10^10 Plastic Roll In Virgin Raw Materials-1

ESD PP 10^10 Plastic Roll In Virgin Raw Materials-2

ESD PP 10^10 Plastic Roll In Virgin Raw Materials-3

ESD PP 10^10 Rollo de plástico en materias primas virgen

Pulixin is an excellent and leading plastic sheet Manufacturer & factory in China. We have advanced technology and equipment, mature foreign trade and export experience, and have established good cooperative relations with customers in more than 60 countries. Free samples supply, OEM & ODM accepted

Marca: PULIXIN Origen: Shanghái, China MOQ: 5 toneladas Espesor: 0,3 ~ 2 mmAncho: 300 ~ 900 mm Aplicación: Termoformado

Correo electrónico: [email protected]

Teléfono: +860086-15221762039

Veloz

Descripción

Features Of ESD PP Plastic Roll

Rollo de hoja extruida de PP is a popular thermoforming materials for food packaings, electronic packagings, cosmetics packagings medical packagings and hardware packaings.,etc. The width of PP Plastic sheet roll is 300~900mm. The thickness of PP Plastic sheet roll rango de 0.3 ~ 2.0 mm. Hojas de pp coloridas could be produced according to Pantone. card. When PP Poise used in food industry, the temperature could reach -40℃ to 120℃. For examples, Sushi tray, bento box, cup, cup lids and so on. Rollo de lámina de PP ESD widely used in electronic inductries for antistatic/conductive performance.

Specification of ESD PP Plastic Roll

Hoja de pp Blister Problem Treatment Sheet Forming
1. heating too fast.
The following methods can be taken to exclude: appropriately reduce the heater temperature.Slow down the heating speed appropriately.Properly increase the distance between the sheet and the heater, so that the heater from the sheet some further.
2. uneven heating.The following methods can be adopted to exclude:
(1) with baffle plate, air distribution hood or screen screen to adjust the distribution of hot air, so that the sheet parts evenly heated.
(2) check whether the heater and shelter net is damaged, and repair the damaged parts.
3. wet sheet.The following methods can be adopted to exclude:
(1) pre-drying treatment.For example, the thickness of 0.5 mm polycarbonate sheet should be dried for 1-2h at the temperature of 125-130 ~C, and the thickness of 3mm Hoja de pp should be dried for 6-7h.The thickness of 3mm * wood should be dried at 80-90 ‘E temperature for 1 — 2 hours, and should be immediately after drying hot forming.
(2) preheating treatment.Change the heating method to heating both sides.Especially when the thickness of the sheet is above 2nan, the two sides must be taken and heated.Do not open the Hoja de pp of moisture-proof packaging too early.Hoja de pp should be unsealed before hot forming and formed immediately.

Parámetros del producto

Parámetros de ESD PP Plastic Roll

Especificación	PP Plastic Sheet roll
Color	Cualquier color	Solicitud	Embalaje eléctrico Envasado de alimentos cosméticos&Regalos.
Ancho	300 ~ 900 mm	Proceso de dar un título	SGS, ROHS
Espesor	0.3 ~ 1.5 mm	Garantía	2 años
Categoría	Impresión Compuesto Grado de alimentos Alta limpieza conductora Polímero antistático permanente Antistático común., etc.	Color de productos terminados	Mate/brillante Transparente Colores comunes.
Resistencia	10^3 ~ 10^11o	Moq	3 TM
Laminador	PP, PS, mascota, etc.	Precio	Basado en especificaciones detalladas
Embalaje	Exportar paleta de plástico	Puerto	Ningbo/shanghai