Hoja RPET

Rollo de láminas de RPET

In food and non-food packaging applications, RPET is most commonly supplied in ABA multilayer structure, where recycled PET is encapsulated between virgin PET layers to ensure safety, consistency, and compliance.

00,18–1,7 mm Rango de grosor
Opción de rollo gigante Hasta 1 tonelada/rollo
ABA de tres capas Estructura de coextrusión
30%-100% RPET Content

Recycled PET Sheet Roll

RPET Sheet Roll is a sustainable thermoforming-grade PET material produced with recycled PET content, designed to balance environmental responsibility with reliable forming performance. In food and non-food packaging applications, RPET is most commonly supplied in ABA multilayer structure, where recycled PET is encapsulated between virgin PET layers to ensure safety, consistency, and compliance.

From real production and export experience, RPET sheet is not simply a “cheaper PET alternative.” Its performance depends heavily on layer structure, recycled content ratio, filtration quality, and extrusion control. When properly engineered, RPET sheets can perform very close to virgin PET in standard thermoforming lines.

ABA Multilayer RPET Sheet

An ABA structure consists of three co-extruded layers:

  • Outer layers (A): PET virgen
  • Core layer (B): Recycled PET (rPET)

This design allows manufacturers to use recycled content while maintaining the surface quality, mechanical strength, and food-contact safety of virgin PET.

Especificaciones técnicas

Especificación Sustainable Recyclable RPET Sheet(GRS)
Color Cualquier color personalizado
RPET Content 30% – 100%
Tratamiento superficial Antiblock / Anti-static / Coating
Ancho 250–1400 milímetros
Espesor 00,18–1,7 mm
Densidad 1.32-1.34g/cm³

Características clave & Ventajas

  • Sustainable Material Solution
    • RPET content ranging from 30% up to 100%, depending on structure and application
    • Supports circular economy goals and carbon footprint reduction
    • Widely accepted in EU, US, and Middle East sustainability-driven markets
  • Food-Grade Safety (ABA Structure)
    • Virgin PET outer layers isolate recycled content from direct food contact
    • Designed to meet FDA, EU food contact regulations, and common third-party audits
    • Suitable for food trays, clamshells, and lids when correctly specified
  • Excelente rendimiento de termoformado
    • Stable heating window in high-speed thermoforming lines
    • Easy material release and consistent forming depth
    • Good thickness distribution even in deep-draw molds
  • Alta transparencia & Brillo
    • Clear appearance with controlled haze
    • Gloss level close to standard APET when recycled flakes are properly filtered
    • Suitable for retail display packaging where product visibility matters
  • Strong Mechanical Properties
    • Good impact resistance, especially in ABA structure
    • Maintains rigidity required for stacking and transport
    • Less brittle than poorly processed mono-layer RPET sheets
  • Eficiencia de rentabilidad
    • Lower raw material cost compared to 100% virgin PET
    • Allows packaging producers to meet recycled-content targets without major tooling changes
Hoja RPET

Beneficios de sostenibilidad

Alto contenido reciclado

Nuestras láminas de PET contienen entre un 30 % y un 100 % de rPET, lo que ayuda a reducir su huella de carbono.

Abastecimiento de PCR de calidad alimentaria

Entre el 30% y el 70% de nuestro rPET proviene de bandejas de alimentos recicladas, lo que garantiza calidad y seguridad.

Cadena de suministro certificada

Todos los materiales cuentan con la certificación GRS para una trazabilidad completa de la cadena de suministro.

Desempeño con Propósito

Nuestras láminas ayudan a prevenir la contaminación y prolongar la vida útil, minimizando el desperdicio de alimentos.

Aplicaciones

PULIXIN’s RPET thermoforming sheet is widely used in food packaging, blister trays, folding boxes, electronics protection, and industrial components.

Envasado de alimentos

  • Fresh food trays and containers
  • Fruit, salad, and bakery clamshells
  • Takeaway food trays (non-microwave use)
  • Lidding-compatible thermoformed bases

Non-Food Packaging

  • Cosmetic inner trays
  • Electronics and accessory trays
  • Envases tipo blister para bienes de consumo
  • Protective packaging inserts
Bandeja-PET-para-alimentos embalaje-de-mascotas-para-juguetes Hoja-de-PET-para-taza Aplicación 3 PET para bandeja PET para envasado de frutas

¿Por qué elegir PULIXIN?

Su socio confiable para materiales termoformados profesionales

Calidad constante

El estricto control del proceso con certificaciones ISO, FDA y de contacto con alimentos garantiza un rendimiento estable para cada rollo y hoja.

Formulaciones personalizadas

Desde soluciones de alto impacto hasta antivaho, anti-UV y de alta claridad, hechas a medida para sus necesidades de producción.

Entrega rápida & Apoyo

Logística eficiente, envío rápido de muestras y soporte técnico receptivo para clientes globales.

¿Necesita láminas de PET/PP/PS personalizadas?

Díganos su espesor, ancho, color y aplicación: diseñaremos la solución perfecta.

Obtenga una cotización rápida