Pulixin est un excellent et principal fabricant et usine de feuille plastique en Chine. Nous avons la technologie et l'équipement avancés, le commerce étranger mûr et l'expérience d'exportation, et avons établi de bonnes relations de coopération avec des clients dans plus de 60 pays. Fourniture d'échantillons gratuits, OEM & ODM acceptés.
We can produce PP/HIPS/PS/ PET High Polymer Material Permanent antistatic/conductive sheet&ROLL, The antistatic property of the material is not affected by temperature and relative humidity. The nano conductive filler and the substrate material, the surface of Yin (10-4-10-6) Gao Jiejing, no analysis. Products are mainly used in the production of high purity of electronic products packaging.
ESD: fast transfer of charge between two objects with different voltage. By reducing the generation and dissipation of the charge to the ground, to achieve the protection of semiconductors, hard drives and other electronic products.
HIPS is a modified material of PS, which contains 5-15% rubber in its molecule. Its toughness is about four times higher than that of PS, and its impact strength is greatly improved. High impact strength grade, glass fiber reinforced grade and low residual volatilization grade. Other important properties of standard HIPS: bending strength 13.8-55.1MPa; tensile strength 13.8-41.4MPa; elongation at break 15-75%; density 1.035-1.04 g/ml; it has PS with molding processing and strong tinting strength The advantages. HIPS products are opaque. HIPS has low water absorption and does not require pre-drying during processing.
Nom du produit : Rouleau de feuilles de plastique en polystyrène à haute résistance aux chocs (HIPS)
Épaisseur : 0,2~2mm
Largeur :300~1050mm
Densité :1,03~1,05g/cm3
Couleurs :Couleur naturelle,Couleur blanche,Couleur blanche laiteuse,Couleur brune,Couleur noire,Couleur rouge,Couleur bleue ,Couleur jaune,Couleur café
La transparence :semi-transparence, opaque
Application :Thermoformage d'emballages alimentaires, de couvercles de gobelets, de plateaux électroniques, d'emballages cosmétiques
Surface :Brillant/mat
Forme :en rouleau ou en feuille coupée
Diamètre extérieur :200-700mm
Diamètre intérieur du noyau :3″(76mm)
Certificat :SGS, TDS, MSDS
Type :ROULEAU DE FEUILLES NORMALES PS À FORT IMPACT
ROULEAU DE FEUILLES ANTISTATIQUES PS À FORT IMPACT
ROULEAU DE FEUILLES DE PS ESD À HAUTE RÉSISTANCE AUX CHOCS
ROULEAU DE FEUILLES CONDUCTRICES PS À HAUTE RÉSISTANCE AUX CHOCS
Élément de test | Méthode d'essai |
Unité |
Propriétés |
Gravité spécifique |
ASTM D792 | g/cm3 | 1.04 |
Résistance aux chocs |
ASTM D256 | mpa | 35 |
Résistance à la traction |
ASTM D638 | mpa | 29 |
Température de déviation de la chaleur | ASTM D648 | ℃ | 85 |
Résistance à la flexion |
ASTM D790 | mpa | 36 |
COULEUR |
VInspection visuelle | / | Sur mesure |
RÉSISTANCE DE SURFACE |
ASTM D257 | Ω | 10 |