0.25 mm Extrudeur rigide Trois couches PP Feuille de thermoformage en rouleau

According to the requirements of Rouleau de feuille PPto the forming conditions, the Angle of mold release: punch 2 o ~ 3 o(5 o optimally), die 1o ~ 3 o(5 o optimally);Molding temperature: sheet temperature 150 ~ 180℃, mold temperature 70℃ ~ 90℃;Molding shrinkage: punch 0.02 ~ 0.03mm/mm, die 0.03 ~ 0.04mm /mm.BecausePP sheet material sheetmaterial has the characteristics of abundant material source, low price, non-toxic, tasteless, good transparency, high mechanical strength, soFeuille de PPmaterial sheet material for vacuum molding processing, made of various packaging products are widely used in food, medicine, mechanical parts, daily necessities and other packaging.At present, PP packaging products appear on the market, in addition to simple lunch box, water, spoon, bowl, pickles box, a variety of local special products packaging box, yogurt pot, tray, etc. Also widely into the market.PP sheet products can be heated in microwave oven and sterilized at 125℃, so it is widely used in ready-to-eat food packaging.In addition, PP sheet vacuum blister molding products have been gradually applied in agricultural production in recent years, such as seedling tray, breeding cup, etc.

In the vacuum blister molding process, the best molding performance of modified Rouleau de feuille PP with (20% ~ 30%) low density polyethylene (PE) is obtained.

The bonding problem is the same as PE, which can be bonded after pretreatment.Welding with heating plate and friction welding was very successful.
Post-processing: when stamping by punching die and trimming die, the cutting gap needs 5mm, the material temperature is too high, the cutting burr. There should be corresponding measures to keep the minimum deformation amount during sealing. The heat sealing with coating layer, the temperature is 150 ~ 180℃, and the sealing time is 1s.