Maison / Produit / / Pp en plastique en plastique rouleau / ESD PP 10^10 Plastic Roll In Virgin Raw Materials
ESD pp 10 ^ 10 rouleau en plastique dans les matières premières vierges
Pulixin is an excellent and leading plastic sheet Manufacturer & factory in China. We have advanced technology and equipment, mature foreign trade and export experience, and have established good cooperative relations with customers in more than 60 countries. Free samples supply, OEM & ODM accepted
- Marque: Pulixine
- Origine: Shanghai, Chine
- MOQ: 5 tonnes
- Épaisseur: 0.3 ~ 2 mm
- Largeur: 300 ~ 900 mm
- Application: Thermoformage
- Envoyer une demande
-
- E-mail: [email protected]
- Téléphone: +8615221762039
- WhatApp
- Wechat
Description
Features Of ESD PP Plastic Roll
PP extruded sheet roll is a popular thermoforming materials for food packaings, electronic packagings, cosmetics packagings medical packagings and hardware packaings.,etc. The width of PP Plastic sheet roll is 300~900mm. The thickness of PP Plastic sheet roll range from 0.3~2.0mm. Colorful PP sheets could be produced according to Pantone. card. When Rouleau de feuille PP used in food industry, the temperature could reach -40℃ to 120℃. For examples, Sushi tray, bento box, cup, cup lids and so on. ESD PP sheet roll widely used in electronic inductries for antistatic/conductive performance.
PP extruded sheet roll is a popular thermoforming materials for food packaings, electronic packagings, cosmetics packagings medical packagings and hardware packaings.,etc. The width of PP Plastic sheet roll is 300~900mm. The thickness of PP Plastic sheet roll range from 0.3~2.0mm. Colorful PP sheets could be produced according to Pantone. card. When Rouleau de feuille PP used in food industry, the temperature could reach -40℃ to 120℃. For examples, Sushi tray, bento box, cup, cup lids and so on. ESD PP sheet roll widely used in electronic inductries for antistatic/conductive performance.
Specification of ESD PP Plastic Roll
Feuille de PP Blister Problem Treatment Sheet Forming
1. heating too fast.
The following methods can be taken to exclude: appropriately reduce the heater temperature.Slow down the heating speed appropriately.Properly increase the distance between the sheet and the heater, so that the heater from the sheet some further.
2. uneven heating.The following methods can be adopted to exclude:
(1) with baffle plate, air distribution hood or screen screen to adjust the distribution of hot air, so that the sheet parts evenly heated.
(2) check whether the heater and shelter net is damaged, and repair the damaged parts.
3. wet sheet.The following methods can be adopted to exclude:
(1) pre-drying treatment.For example, the thickness of 0.5 mm polycarbonate sheet should be dried for 1-2h at the temperature of 125-130 ~C, and the thickness of 3mm Feuille de PP should be dried for 6-7h.The thickness of 3mm * wood should be dried at 80-90 ‘E temperature for 1 — 2 hours, and should be immediately after drying hot forming.
(2) preheating treatment.Change the heating method to heating both sides.Especially when the thickness of the sheet is above 2nan, the two sides must be taken and heated.Do not open the Feuille de PP of moisture-proof packaging too early.Feuille de PP should be unsealed before hot forming and formed immediately.
Feuille de PP Blister Problem Treatment Sheet Forming
1. heating too fast.
The following methods can be taken to exclude: appropriately reduce the heater temperature.Slow down the heating speed appropriately.Properly increase the distance between the sheet and the heater, so that the heater from the sheet some further.
2. uneven heating.The following methods can be adopted to exclude:
(1) with baffle plate, air distribution hood or screen screen to adjust the distribution of hot air, so that the sheet parts evenly heated.
(2) check whether the heater and shelter net is damaged, and repair the damaged parts.
3. wet sheet.The following methods can be adopted to exclude:
(1) pre-drying treatment.For example, the thickness of 0.5 mm polycarbonate sheet should be dried for 1-2h at the temperature of 125-130 ~C, and the thickness of 3mm Feuille de PP should be dried for 6-7h.The thickness of 3mm * wood should be dried at 80-90 ‘E temperature for 1 — 2 hours, and should be immediately after drying hot forming.
(2) preheating treatment.Change the heating method to heating both sides.Especially when the thickness of the sheet is above 2nan, the two sides must be taken and heated.Do not open the Feuille de PP of moisture-proof packaging too early.Feuille de PP should be unsealed before hot forming and formed immediately.
Paramètres du produit
Paramètres de ESD PP Plastic Roll
| Spécification | PP Plastic Sheet roll | ||
| Couleur | Toute couleur | Application | Emballage électrique Cosmétique d'emballage alimentaire&Cadeaux. |
| Largeur | 300 ~ 900 mm | Certification | SGS, ROHS |
| Épaisseur | 0.3 ~ 1,5 mm | Garantie | 2 ans |
| Catégorie | Impression Composé Qualité alimentaire Propreté élevée conductrice Polymère antistatique permanent antistatique commun., etc. |
Couleur des marchandises finies | Mat / brillant Transparent Couleurs communes. |
| Résistance | 10 ^ 3 ~ 10 ^ 11o | MOQ | 3 MT |
| Plastifiant | PP, PS, animal de compagnie, etc. | Prix | Basé sur des spécifications détaillées |
| Conditionnement | Exporter une palette en plastique | Port | Ningbo / Shanghai |
Pourquoi choisir Pulixine
La poulixine est un excellent fabricant de rouleaux en plastique PP leader en Chine. Notre usine couvre une superficie de plus de 10 000 mètres carrés et possède 4 lignes de production de feuilles de polypropylène rigides avec un équipement avancé international. Il peut produire 3 000 à 5 000 tonnes de feuilles de plastique PP par mois, et la capacité de stockage maximale dépasse 10 000 tonnes.- Usine de haut niveau
- 1, 6000㎡ zone
2, 10 lignes de co-extrusion
3, 15 ans d'expérience
4, 2300+ clients réguliers
- Service prévenant
- 1, réponse rapide aux demandes
2, échantillon gratuit sur le paiement des frais de port
3, forte capacité, production courte et livraison rapide
4, inspection d'usine acceptable
5, support OEM
- Contrôle de qualité strict
- 1, erreur d'épaisseur: + - 0,1 mm
2, poids erroe: + - 1kg
3, Impédance antistatique: + -0,1Ω
- À la livraison à temps
- 1, Production: 1 jour après le prépaiement
2, livraison: 5 jours après le paiement final
