ESD PP 10^10 Plastic Roll In Virgin Raw Materials
Pulixin is an excellent and leading plastic sheet Manufacturer & factory in China. We have advanced technology and equipment, mature foreign trade and export experience, and have established good cooperative relations with customers in more than 60 countries. Free samples supply, OEM & ODM accepted
- Merek: Pulixin
- Asal: Shanghai, Cina
- MOQ: 5 ton
- Ketebalan: 0.3 ~ 2mm
- Lebar: 300 ~ 900mm
- Aplikasi: Thermoforming
- Kirim pertanyaan
-
- E-mail: [email protected]
- Telepon: +8615221762039
- Whatapp
- Wechat wechat
Keterangan
Features Of ESD PP Plastic Roll
PP extruded sheet roll is a popular thermoforming materials for food packaings, electronic packagings, cosmetics packagings medical packagings and hardware packaings.,etc. The width of PP Plastic sheet roll is 300~900mm. The thickness of PP Plastic sheet roll range from 0.3~2.0mm. Colorful PP sheets could be produced according to Pantone. card. When PP sheet roll used in food industry, the temperature could reach -40℃ to 120℃. For examples, Sushi tray, bento box, cup, cup lids and so on. ESD PP sheet roll widely used in electronic inductries for antistatic/conductive performance.
PP extruded sheet roll is a popular thermoforming materials for food packaings, electronic packagings, cosmetics packagings medical packagings and hardware packaings.,etc. The width of PP Plastic sheet roll is 300~900mm. The thickness of PP Plastic sheet roll range from 0.3~2.0mm. Colorful PP sheets could be produced according to Pantone. card. When PP sheet roll used in food industry, the temperature could reach -40℃ to 120℃. For examples, Sushi tray, bento box, cup, cup lids and so on. ESD PP sheet roll widely used in electronic inductries for antistatic/conductive performance.
Specification of ESD PP Plastic Roll
Lembar pp Blister Problem Treatment Sheet Forming
1. heating too fast.
The following methods can be taken to exclude: appropriately reduce the heater temperature.Slow down the heating speed appropriately.Properly increase the distance between the sheet and the heater, so that the heater from the sheet some further.
2. uneven heating.The following methods can be adopted to exclude:
(1) with baffle plate, air distribution hood or screen screen to adjust the distribution of hot air, so that the sheet parts evenly heated.
(2) check whether the heater and shelter net is damaged, and repair the damaged parts.
3. wet sheet.The following methods can be adopted to exclude:
(1) pre-drying treatment.For example, the thickness of 0.5 mm polycarbonate sheet should be dried for 1-2h at the temperature of 125-130 ~C, and the thickness of 3mm Lembar pp should be dried for 6-7h.The thickness of 3mm * wood should be dried at 80-90 ‘E temperature for 1 — 2 hours, and should be immediately after drying hot forming.
(2) preheating treatment.Change the heating method to heating both sides.Especially when the thickness of the sheet is above 2nan, the two sides must be taken and heated.Do not open the Lembar pp of moisture-proof packaging too early.Lembar pp should be unsealed before hot forming and formed immediately.
Lembar pp Blister Problem Treatment Sheet Forming
1. heating too fast.
The following methods can be taken to exclude: appropriately reduce the heater temperature.Slow down the heating speed appropriately.Properly increase the distance between the sheet and the heater, so that the heater from the sheet some further.
2. uneven heating.The following methods can be adopted to exclude:
(1) with baffle plate, air distribution hood or screen screen to adjust the distribution of hot air, so that the sheet parts evenly heated.
(2) check whether the heater and shelter net is damaged, and repair the damaged parts.
3. wet sheet.The following methods can be adopted to exclude:
(1) pre-drying treatment.For example, the thickness of 0.5 mm polycarbonate sheet should be dried for 1-2h at the temperature of 125-130 ~C, and the thickness of 3mm Lembar pp should be dried for 6-7h.The thickness of 3mm * wood should be dried at 80-90 ‘E temperature for 1 — 2 hours, and should be immediately after drying hot forming.
(2) preheating treatment.Change the heating method to heating both sides.Especially when the thickness of the sheet is above 2nan, the two sides must be taken and heated.Do not open the Lembar pp of moisture-proof packaging too early.Lembar pp should be unsealed before hot forming and formed immediately.
Parameter produk
Parameter ESD PP Plastic Roll
| Spesifikasi | PP Plastic Sheet roll | ||
| Warna | Warna apa pun | Aplikasi | Kemasan Listrik Kosmetik Kemasan Makanan&Hadiah. |
| Lebar | 300 ~ 900mm | Sertifikasi | SGS, Rohs |
| Ketebalan | 0.3 ~ 1.5mm | Jaminan | 2 tahun |
| Kategori | Pencetakan Menggabungkan Grade food Konduktif kebersihan tinggi Polimer antistatik permanen Antistatik umum., dll. |
Warna barang jadi | Matte/glossy Transparan Warna umum. |
| Perlawanan | 10^3 ~ 10^11o | Moq | 3 mt |
| Laminasi | PP, PS, hewan peliharaan, dll. | Harga | Berdasarkan spesifikasi terperinci |
| Kemasan | Ekspor palet plastik | Pelabuhan | Ningbo/Shanghai |
Mengapa Memilih Pulixin
Pulixin adalah produsen gulungan lembaran plastik PP terkemuka yang sangat baik di Cina. Pabrik kami mencakup area lebih dari 10.000 meter persegi dan memiliki 4 jalur produksi lembaran polypropylene yang kaku dengan peralatan canggih internasional. Ini dapat menghasilkan 3.000-5.000 ton lembaran plastik PP per bulan, dan kapasitas penyimpanan maksimum melebihi 10.000 ton.- Pabrik tingkat tinggi
- 1, 6000㎡ area
2, 10 garis co-ekstrusi
Pengalaman 3, 15 tahun
4, 2300+ pelanggan tetap
- Layanan Pertimbangan
- 1, balasan cepat untuk pertanyaan
2, sampel gratis untuk membayar ongkos kirim
3, kapasitas yang kuat, produksi pendek dan pengiriman cepat
4, inspeksi pabrik yang dapat diterima
5, Dukungan OEM
- Kontrol kualitas yang ketat
- 1, Kesalahan Ketebalan:+-0.1mm
2, berat erroe:+-1kg
3, Impedansi Antistatik: +-0.1Ω
- Pengiriman tepat waktu
- 1, produksi: 1 hari setelah prabayar
2, pengiriman: 5 hari setelah pembayaran akhir
