Extruded HIPS plastic roll manufacturer for plastic blister tray

Extruded HIPS plastic roll,hips plastic blister roll, hips plastic rolldensity of the blister sheet is the density of polystyrene, the amorphous density is 1.04 to 1.06 g / cm3, and the crystal density is 1.11 to 1.12 g / cm3. The melting temperature is 240 ° C, and the resistivity is 1020 to 1022 ohm · cm.
Extruded HIPS plastic roll,hips plastic blister roll, hips plastic roll that is, polystyrene, refers to a polymer synthesized from a styrene monomer through a radical addition polymerization reaction. It is a colorless and transparent thermoplastic with a glass transition temperature above 100 ° C, so it is often used to make a variety of disposable containers that need to withstand the temperature of boiling water, and disposable foam lunch boxes.

Extruded HIPS plastic roll,hips plastic blister roll, hips plastic roll detail information:
A. The thickness of ordinary thin blister is 0.14 ~ 5.0mm — it is mainly made of various materials and effects such as PP, PS (HIPS), PET (including APET and PETG), and recyclable paper tray. Non-thermoformed plastic products such as hemming, folding, tri-folding, cylinder, folding box, heaven and earth box, high frequency, etc. are widely used in food, medicine, electronics, toys, computers, daily necessities, cosmetics and machinery hardware industries. B. Special thick blister thickness is 0.14 ～ 8.0mm ———— It is mainly used for injection molding of various materials and effects such as PP, PS (HIPS), PET (including APET and PETG), Extruded HIPS plastic roll,hips plastic blister roll, hips plastic roll
 Types of Extruded HIPS plastic roll,hips plastic blister roll, hips plastic roll, the main products are refrigerator liners, advertising light boxes, merchandise display racks, pet cage chassis, rear-projection TV rear shell and various mechanical panels, etc., can replace injection products, have low mold costs (only 1 / 20), short production cycle, short mold development time (usually only 3 to 5 days), etc. The reason why the types of materials are not classified, mainly considering the materials used for ordinary thin plastic and special thick plastic There are some differences, but Extruded HIPS plastic roll,hips plastic blister roll, hips plastic roll have a place in these two types of plastic products, which can be called the “four kings” of the family of plastic products! The rigid PVC sheet has moderate toughness and is not easy to burn. Chlorine gas will be generated during combustion, which will have certain impact on the environment. PVC is easy to heat-seal. It can be sealed with a sealing machine and high-frequency machine. It is the main raw material for the production of transparent plastic products. Extruded HIPS plastic roll,hips plastic blister roll, hips plastic roll  has low density, poor toughness, easy to burn, and will produce styrene gas (a harmful gas) when burning, so it is generally used to produce various industrial plastic trays. PET rigid film has good toughness, high transparency, easy to burn, and does not generate harmful gas during combustion. It is an environmentally friendly material, but it is expensive and suitable for high-grade plastic products. It is not easy to heat-seal, which brings great difficulties to packaging. In order to solve this problem, people laminated a PVC film on the surface of PET, named PETG hard sheet, but the price is higher. The characteristics and uses of blister light boxes Characteristics and uses of blister light boxes made of plastic sheet: Blister light boxes are a general term for light boxes formed by blister methods. Extruded HIPS plastic roll,hips plastic blister roll, hips plastic rollwhich is often called acrylic. Its shapes are square, round, and special (other geometric shapes). The frame of the blister light box is bent from aluminum profile. The width of aluminum profile is 6cm, 8cm, 10cm, 11.5cm, etc., you can choose the appropriate width according to the size of the light box or the customer’s requirements. Larger light boxes can be reinforced with steel. Depending on the installation method, the light box feet are T-shaped and hoop mounted on a cylinder. The light box sheet is made of acrylic sheet and heated by a plastic machine to extract a raised panel as the surface of the light box. It can also be pressed by a compression molding machine. It can be widely used in bank financial institutions, road signs, various shop facades, bank outlets, chain stores, major shopping malls, supermarkets, urban street poles, used as signboards, indication signs, publicity display and other places.