Polyethylene PET Plastic Roll for disposable protect face shield

Physical and mechanical properties of PET sheet for thermoforming PET is a milky white translucent or colorless transparent body.
Polyethylene PET Plastic Roll  is a medium barrier material. the transmission coefficient for carbon dioxide is 180. m3 ～ and 2 · small MPa, the water absorption rate is 0.6%, and the water absorption is large.
Compared with other materials, Polyethylene PET Plastic Roll has high tensile strength, comparable to aluminum foil, 9 times that of PE-HD, and 3 times that of PC and PA.
Good barrier properties, stable size, high transparency, high impact strength, no Poisonous and tasteless, easy to thermoform, PET sheet can be made into various shapes of complex thermoformed products.
The commonly used PET sheet is an amorphous PETP resin, with a characteristic dryness of 0.6 to 0.7 dl, and electricity. PET sheets can be produced by extrusion casting. Amorphous transparent sheet, also called APET sheet, extruded and quenched by T-type head, usually has a thickness of 0.2mm to 0.6 ~. APET sheet can be used as a variety of transparent thermoformed packaging products. The crystalline modified PET sheet (CPET) also has high temperature resistance (15O-200 ° C). Usually a thickness of 0.20 to 1.00 mm.CPET cast sheet can be used as a thermoformed product. Crystallized PET sheet (CPET) also has high temperature resistance (150-200 ° C). Usually the thickness is 0.20 ~ 1. ~, CPET cast sheet can be used as a thermoformed product.
The requirements of thermoforming on materials are as follows:
① good heating extensibility, high height-to-diameter ratio (ie, stretching ratio), and good extensibility;
② sufficient high tensile strength, impact strength, and needle resistance Porosity;
③ Products with compound requirements must have good heat-dried strength;
④ Good transparency and gloss, which are convenient for the sale of packaged goods;
⑤ Waste packaging is easy to handle; It should have non-toxic, odorless or low-odor requirements; for products with color printing requirements, corona treatment should be performed. See table for general physical and mechanical properties of PErr sheet suitable for thermoforming.

Specification of Polyethylene PET Plastic Roll for disposable protect face shield
Thickness: 0.25-1.5mm
Max Width:300~ 1200mm
Color:transparent,black,green
Density:1.33~1.34g/cm3
Certification:ROHS,MSDS,TDS,SGS,ISO9001
Raw Material:100% raw material
Advantage:environmental friendly
Sample:A4 size or free provide 10kg for test quality
MOQ:5 tons
Packing:packing in rolls and plastic pallet,pp woven with PE film and strape on pallet for each roll
Core Diameter:3 inch or 6 inch depend on customer requirement
Applicaion Industry:Food packaging,electronic packing,cosmetic packaging,toy packing and so on.
Features: Uniform thickness, smooth surface/beautiful sand ripples, no grains, contamination control and good processing performance.