Pulixin является отличным и ведущим производителем и фабрикой пластиковых листов в Китае. Мы имеем передовые технологии и оборудование, зрелый опыт внешней торговли и экспорта, и установили хорошие отношения сотрудничества с клиентами в более чем 60 странах. Поставка бесплатных образцов, OEM и ODM принимаются
HIPS is a modified material of PS, which contains 5-15% rubber in its molecule. Its toughness is about four times higher than that of PS, and its impact strength is greatly improved. It has flame-retardant, stress-cracking resistance, high gloss, and extremely High impact strength grade, glass fiber reinforced grade and low residual volatilization grade. Other important properties of standard HIPS: bending strength 13.8-55.1MPa; tensile strength 13.8-41.4MPa; elongation at break 15-75%; density 1.035-1.04 g/ml; it has PS with molding processing and strong tinting strength The advantages. HIPS products are opaque. HIPS has low water absorption, no need for pre-drying during processing.
1.Conductive sheet: Our company produces conductive sheet that is widely used in electronic tray blister, and the surface resistance can reach the 4-6 power of 10. The advantages are not disturbed by weather factors. Manufacturers used: Shanghai Jiusheng Blister, Leiyu Blister, Xumei Blister, etc.
2. Semi-conductive sheet: Our company produces conductive sheet, which is widely used in electronic tray blister, and the surface resistance can reach 10 to the 6-9th power. Manufacturers used: Shanghai Jiusheng Blister, Leiyu Blister, Xumei Blister, etc.
3. Ordinary anti-static sheet: Our company produces conductive sheet, which is widely used in electronic tray blister, and the surface resistance can reach 10 to the 9-12 power. Advantages: affordable, disadvantages: affected by the weather, if not affected by the weather, you can choose conductive sheets or permanent antistatic sheets. Manufacturers used: Shanghai Jiusheng Blister, Leiyu Blister, Xumei Blister, etc.
Листовой рулон HIPS Артикул | Метод испытания | Единица | Свойства |
Удельный вес | ASTM D792 | г/см3 | 1.05 |
Ударная прочность | ASTM D256 | мпа | 35 |
Прочность на разрыв | ASTM D638 | мпа | 29 |
Температура теплового отклонения | ASTM D648 | ℃ | 85 |
Прочность на изгиб | ASTM D790 | мпа | 36 |
ЦВЕТ | Визуальный осмотр | / | Белый (цветной) |
ПОВЕРХНОСТНОЕ СОПРОТИВЛЕНИЕ | ASTM D257 | Ω | 10^9~10^11 |