PET лист 0.5 мм ESD жесткий рулон жесткой PET пленки для термоформовки

How to control the PET sheet 0.5mm ESD Rigid PET Film Roll For Thermoforming process?
Firstly, the coating solution needs to be stored in a dark and sealed place, because some coating solutions will deteriorate at high or low temperatures, and the temperature needs to be controlled during storage and transportation. The coating liquid needs to be used within the validity period. The prepared coating liquid needs to be stored in a liquid tank with a cooling jacket, continuously stirred, and not stored for a long time. In the PET лист 0.5 мм ESD жесткий рулон жесткой PET пленки для термоформовки  production, if the coating roller part Failure to transfer the coating liquid to the cast will result in missed coating. During the subsequent processing of the film, the missing coating position of the film cannot fulfill its due surface function, which will cause quality problems in printing, aluminum plating and other processes. Therefore, the missing coating must be checked and resolved during the coating production process.

 After the waste film produced in the coating production process is granulated, it needs to be stored separately and used as required. It cannot be directly entered into the raw material cycle. At the same time, the coating liquid will also affect the stability of the granulation production. The granulation extrusion speed needs to be adjusted to ensure stable production.

 PULIXIN Materials Co., Ltd. is a professional manufacturer of PET films with multiple functions, such as: transparent PET film, milky white PET film, release PET film, and supply of PET лист 0.5 мм ESD жесткий рулон жесткой PET пленки для термоформовки .