Pulixin es un excelente y principal fabricante y fábrica de láminas de plástico en China. Contamos con tecnología y equipos avanzados, experiencia madura en comercio exterior y exportación, y hemos establecido buenas relaciones de cooperación con clientes de más de 60 países. Suministro de muestras gratuitas, aceptamos OEM y ODM.
We can produce PP/HIPS/PS/ PET High Polymer Material Permanent antistatic/conductive sheet&ROLL, The antistatic property of the material is not affected by temperature and relative humidity. The nano conductive filler and the substrate material, the surface of Yin (10-4-10-6) Gao Jiejing, no analysis. Products are mainly used in the production of high purity of electronic products packaging.
ESD: fast transfer of charge between two objects with different voltage. By reducing the generation and dissipation of the charge to the ground, to achieve the protection of semiconductors, hard drives and other electronic products.
HIPS is a modified material of PS, which contains 5-15% rubber in its molecule. Its toughness is about four times higher than that of PS, and its impact strength is greatly improved. High impact strength grade, glass fiber reinforced grade and low residual volatilization grade. Other important properties of standard HIPS: bending strength 13.8-55.1MPa; tensile strength 13.8-41.4MPa; elongation at break 15-75%; density 1.035-1.04 g/ml; it has PS with molding processing and strong tinting strength The advantages. HIPS products are opaque. HIPS has low water absorption and does not require pre-drying during processing.
Nombre del producto: Rollo de poliestireno de alto impacto HIPS
Grosor: 0,2~2 mm
Anchura:300~1050mm
Densidad:1,03~1,05g/cm3
Colores:Color natural,Color blanco,Color blanco lechoso,Color marrón,Color negro,Color rojo,Color azul,Color amarillo,Color café
Transparencia:semitransparencia,opaco
Aplicación:Termoformado de envases alimentarios,tapas de vasos,Bandeja electrónica,envases cosméticos
Superficie:Brillante/mate
Forma:en rollo o en hojas sueltas
Diámetro exterior:200-700mm
Diámetro interior del núcleo:3″(76mm)
Certificado:SGS,TDS,MSDS
Tipo:ROLLO DE CHAPA NORMAL PS DE ALTO IMPACTO
ROLLO DE LÁMINA ANTIESTÁTICA PS DE ALTO IMPACTO
ROLLO DE CHAPA PS ESD DE ALTO IMPACTO
ROLLO DE LÁMINA CONDUCTORA PS DE ALTO IMPACTO
Elemento de prueba | Método de ensayo |
Unidad |
Propiedades |
Peso específico |
ASTM D792 | g/cm3 | 1.04 |
Resistencia al impacto |
ASTM D256 | mpa | 35 |
Resistencia a la tracción |
ASTM D638 | mpa | 29 |
Temperatura de deflexión térmica | ASTM D648 | ℃ | 85 |
Resistencia a la flexión |
ASTM D790 | mpa | 36 |
COLOR |
Vispección visual | / | Personalizado |
RESISTENCIA SUPERFICIAL |
ASTM D257 | Ω | 10 |