Pulixin es un excelente y principal fabricante y fábrica de láminas de plástico en China. Contamos con tecnología y equipos avanzados, experiencia madura en comercio exterior y exportación, y hemos establecido buenas relaciones de cooperación con clientes de más de 60 países. Suministro de muestras gratuitas, aceptamos OEM y ODM.
There are several ways to make polystyrene.One of the earliest methods of industrial production is to make transparent PS sheet by suspension polymerization and plancha de PS resistente a los impactos by bulk and suspension polymerization.The styrene monomer is mixed with almost equal volume of water, and the surfactant is added to stir the styrene monomer into suspended droplets, which are finally polymerized into hard beads.An initiator is added to the reaction to accelerate and terminate the reaction.Finally, the polystyrene beads are extruded into pellets.
The same method is used to prepare the developable polystyrene, except that a foaming agent (typically pentane) is added during the impregnation process.The method of anti-impact polystyrene is to dissolve rubber in styrene and conduct bulk polymerization (make styrene and Ficha PS react below the phase transition point, add water and surfactant to make it into suspension, add no agent to terminate the reaction, and then dry the bead, extrude and cut the bead.At present, continuous bulk polymerization is mostly adopted in production. In this production process, styrene (to make transparent PS sheet material) or styrene – rubber solution (to make plancha de PS resistente a los impactos material) should undergo continuous reaction before reaching the optimal conversion rate, and then stripping off the unreacted components for granulation.