0.5mm 1mm Clear Rigid Anti-static Plastic HIPS Film Rolls For Thermoforming

Description of 0.5mm rigid plastic hips roll, clear plastic hips film, antistatic hips rolls for thermoforming
0.5mm rigid plastic hips roll, clear plastic hips film, antistatic hips rolls for thermoforming is an abbreviation for Impact Resistant Polystyrene. Impact-resistant polystyrene is an impact-resistant polystyrene product produced by adding polybutyl rubber particles to polystyrene. This polystyrene product adds micron-sized rubber particles and connects the polystyrene and rubber particles together by grafting. When impacted, the stress at the tip of the crack propagation is released by the relatively soft rubber particles. Therefore, crack propagation is hindered, and impact resistance is improved.

0.5mm rigid plastic hips roll, clear plastic hips film, antistatic hips rolls for thermoforming is a widely used brittle plastic. The shell of the computer in use, the transparent plastic water cup, and the foam for packaging are made of polystyrene.

0.5mm rigid plastic hips roll, clear plastic hips film, antistatic hips rolls for thermoforming Engineering Plastics

Milky white opaque particles. Density is 1.05g / cm ^ 3. Melting temperature is 150 ~ 180 ℃. Thermal decomposition temperature is 300 ℃. Soluble in aromatic hydrocarbons, chlorinated hydrocarbons, ketones (except ketones) and esters. Resistant to many minerals Oil, organic acid, alkali, salt, lower alcohol and its aqueous solution, not resistant to boiling water. HIPS is one of the cheapest engineering plastics. Compared with ABS, PC / ABS, PC, the 0.5mm rigid plastic hips roll, clear plastic hips film, antistatic hips rolls for thermoforming material has poor gloss and comprehensive performance. Relatively poor. 0.5mm rigid plastic hips roll, clear plastic hips film, antistatic hips rolls for thermoforming is modified by PS plus butadiene, because the impact strength of PS is very low, the product made is very brittle, but the toughness of butadiene is very good, after adding butadiene can make PS The impact performance of HIPS is increased by 2 to 3 times. Although the impact strength of HIPS is much higher than the impact strength of PS, its overall performance is still not as good as ABS, PC / ABS, etc. The impact performance of HIPS is relatively low in engineering plastics, so We should pay attention to the inspection of the impact performance of the material when using secondary materials.

Преимущество rigid plastic hips roll, clear plastic hips film, antistatic hips rolls for thermoforming

1.UV print screen printing, offset printing.

2.Light box, advertising Board, display shelf.

3.Decorative sheets, storage racks, etc.    

4.Packaging, crafts and advertising signs.

5.Architectural notice Board:carved flower.

6.HIPS sheet for refrigerator. 

And more specification of rigid plastic hips roll, clear plastic hips film, antistatic hips rolls for thermoforming

1.high impact resistant.                                     

2.excellent light transmittance.

3.non-toxic and chemical resistant.                   

4.food grade.

5.easy formable.                                                 

6.weather proof.